Dual Arm Mount and Mover

Description

The Mount'n Mover is a versatile and accessible wheelchair mounting system that can be customized and changed, according to your needs

• Customizable lock-setters provide secure locks and repeatable user-specific positioning
• Multiple lock positions may be set (12 per joint)
• Built-in tilt plate adjusts from 0 to 90 degrees and anywhere in between
• Handles provide easy-access, one-handed lock release and operation
• Tool-free adjustments
• Tilt hinges built-in resistance keeps devices and trays from slamming down
Attach to a wheelchair, table or floor stand

You need greater flexibility to:

• use your device in more than one operating position
• set a different position for a second device
• position something "just so"
• move it around other things
• position it so the controls are either away from or towards the person

You Need a longer arm, so you can:

• extend it more than 8" from the side of your chair
• extend across midline
• mount to the side opposite the joystick, and still position the device on that side
• use it for eye gaze
• extend it forward and inward

You have limited reach:

• Less range of motion is required to move it to another operating position
• the Hoop unlocks both the Elbow and Shoulder
move the arm laterally, and it will still be within reach

Wheelchair Mounting

• Different plates and clamps are used to attach to the wheelchair (B)
• A Wheelchair Bracket attaches to those plates or clamps (A)
• The Post inserts into the Bracket (C)
• Offset options like the Adapter and L-Angle plates can be used to move the point of attachment for the Bracket (between B and A)
The Adjustable Angle Plate can be used to adjust the angle of the Post so it is as close to vertical as possible in a person's typical sitting angle

Table Mounting

• Quickly adjust tilt, height and positioning
• Extends out from a table-easy wheelchair access
• Conduct evaluations easily, with good positioning
• speech device trials
• access to computers and controls
• Clamps to any desk, table or tray from 1/2" to 3"
• Tool-less operation
• Attach above or below table